Raspberry Pi 3 Model A+ 64-bit Quad Core 1.4GHz WIFI Dual-Band 2.4G 5G Bluetooth 4.2/BLE [2946269] Raspberry Pi 3 Model A+ 64-bit Quad Core 1.4GHz WIFI Dual-Band 2.4G 5G Bluetooth 4.2/BLESAFETY INSTRUCTIONSTo avoid malfunction or damage to this product, please observe the following: - Do not expose to water or moisture, or place on a conductive surface while in operation. - Do not expose to heat from any source; the Raspberry Pi 3 Model A+ is designed for reliable operation at normal ambient temperatures. - Take care while handling to avoid mechanical or electrical damage to the printed circuit board and connectors. - While it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimise the risk of electrostatic discharge damage.WARNINGS - This product should only be connected to an external power supply rated at 5 V/2.5 A DC. Any external power supply used with the Raspberry Pi 3 Model A+ shall comply with relevant regulations and standards applicable in the country of intended use. - This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered. - While in use, this product should be placed on a stable, flat, non-conductive surface and should not be contacted by conductive items. - The connection of incompatible devices to the GPIO connection may affect compliance, result in damage to the unit, and invalidate the warranty. - All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to keyboards, monitors, and mice when used in conjunction with the Raspberry Pi. - The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.OverviewThe Raspberry Pi 3 Model A+ is the latest product in the Raspberry Pi 3 range. Like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, and Bluetooth 4.2/BLE.The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.The Raspberry Pi 3 Model A+ has the same mechanical footprint as the Raspberry Pi 1 Model A+.PRODUCT BRIEF, MECHANICAL DRAWINGS, AND SCHEMATICSRaspberry Pi 3 Model A+ product briefRaspberry Pi 3 Model A+ mechanical drawingRaspberry Pi 3 Model A+ schematic diagramsProcessorBroadcom BCM2837B0, Cortex-A53, 64-bit SoC @ 1.4 GHzMemory512MB LPDDR2 SDRAMConnectivity2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLEAccessExtended 40-pin GPIO headerVideo & sound1 × full size HDMIMIPI DSI display portMIPI CSI camera port4 pole stereo output and composite video portMultimediaH.264, MPEG-4 decode (1080p30);H.264 encode (1080p30);OpenGL ES 1.1, 2.0 graphicsSD card supportMicro SD format for loading operating system and data storageInput power5 V/2.5 A DC via micro USB connector5 V DC via GPIO headerEnvironmentOperating temperature, 0-50°CProduction lifetimeThe Raspberry Pi 3 Model A+ will remain in production until at least January 2023- MPN: 2946269.

In unserem Shop erhältst du automatisch einen Mengenrabatt. Der Rabatt gilt bereits ab 3 Produkten. Lege einfach mindestens 3 Artikel in deinen Warenkorb, und der Mengenrabatt wird direkt im Check-out automatisch abgezogen.

Artikelanzahl	Rabatt
ab 3 Artikel	3% Rabatt auf deine Bestellung
ab 4 Artikel	4% Rabatt auf deine Bestellung
ab 5 Artikel	5% Rabatt auf deine Bestellung
ab 8 Artikel	6% Rabatt auf deine Bestellung

Unsere Produkte stammen aus Retouren anderer Online-Shops. Wir prüfen jedes Produkt von Hand in unserer Reparaturwerkstatt in Ludwigsfelde bei Berlin. Nach dieser Prüfung wird der Zustand des Artikels bestimmt und ein Wiederverkaufspreis festgelegt & wieder in unserem Shop angeboten.

Unsere Produkte stammen aus Retouren anderer Online-Shops. Wir prüfen jedes Produkt von Hand in unserer Reparaturwerkstatt in Ludwigsfelde bei Berlin. Nach dieser Prüfung wird der Zustand des Artikels bestimmt und ein Wiederverkaufspreis festgelegt & wieder in unserem Shop angeboten.

Dein Produkt wird innerhalb von 2–3 Werktagen mit DHL, GLS oder Hermes versendet. Die Versandkosten betragen 4,90 €, ab einem Warenkorbwert von 100 € ist der Versand kostenlos.

Wir haben ein 30-tägiges kostenloses Rückgaberecht. Im Falle einer Rücksendung aufgrund eines technischen Fehlers o.ä. entstehen dir keine Rücksendekosten.

RASPBERRY-PI